A car seat is one of the most significant investments you’ll ever make out of all the stuff you’re going to buy for your kid. It’s hard to understand which seat to choose for each phase of your child’s life with all the decisions and evolving suggestions. Our vehicle seat purchasing manual will roll out some of the guesswork so you’ll save time and school to find the correct vehicle seat.

They will need a child safety restraint from the time your baby leaves the hospital to the time they are prepared for an adult seat belt. However, when shopping for vehicle seats, there are several variables to consider. Of course, safety scores are essential, but so are the age and size of your child, your budget, your type of car, your lifestyle, and more.

Why is it so important to find the perfect car seat?

First of all, if you do not have a correctly installed car seat for your baby, the hospital will not let you leave. Your local town and state laws will also determine your car seat and how you use it. As your kid grows, their demands for car seats will also alter, so you may need to buy extra seats depending on what type of seats you buy.

 

Choosing the Right Seat

  • The seats must be labeled as compliant. Because safety standards are not the same, it is illegal to use a car seat bought in another nation.
  • Read carefully the handbook of your car owner and the manufacturer’s seat guidelines as they may differ by car and seats.
  • Fill out the seat registration card. The seats can also be registered online on the website of the manufacturer. This allows the manufacturer to recall the seats if it is faulty.
  • Respect the expiry date written on the seats or on the orders of the manufacturer because the seat materials lose strength over time. The expiry date must be calculated for specific safety seat designs based on the date the seat was produced. Only the manufacturer can extend a child seat’s expiry date.
  • Check the directions from the seat supplier to see if the seats have to be substituted based on the accident severity. In case of doubt, replacing the vehicle seat after an accident is highly suggested, even if it does not appear to have been damaged. Check with your personal insurer to see if your policy covers vehicle seats.

If You Are Considering a Second-Hand Car Seat

Using a second-hand car seat is strongly discouraged. If you are considering a used car seat, make sure that:

  • the car seat complies with the applicable safety standards;
  • the seat has not passed its expiry date;
  • the seat has never been in an accident;
  • the seat model has never been recalled due to a defect;
  • all the parts are present and intact;
  • all the labels are visible on the seat.

You can always get the seat’s manual from its manufacturer.

Properly Installing the Seat

♦ Put it in the back seat

The back seat is the furthest away from impact areas in a head-on collision.

♦ Keep it away from air bags

Never sit in the front seat of a car with a front air bag on the passenger side for kids aged 12 or under. The kid must not be put in their deployment area if the car is fitted with side air bags or curtains. For example, if the child leans against the door of the vehicle to sleep, this would be the case.

♦ Fasten it securely

Cars and child safety seats produced since September 2002 are safely fastened and fitted with a universal anchorage scheme (UAS) to secure the seat firmly. The baby safety seats have two connectors that tie on two metal anchorage bars in the back seat of the vehicle. Use the seat belt of the car to secure the safety seat if your vehicle or child safety seat is not fitted with a UAS.

♦ Do not add anything to it

Do not use accessories which do not come with the car seat itself (head cushions, buckles for seat belt adjustment, mirrors, etc.). These accessories may loosen the harness straps that hold the kid or in the case of a crash or sudden braking.

 

Child Safety Seat Components

 

 

1. Chest clip

2. Harness buckle

3. Buckle strap

4. Harness slots

5. Harness straps

6. Tether strap

7. Harness adjustment strap

Child safety seats

Know which type of seat you need

seats age

You are prepared to discover a car seat that works for you once you determine your local laws, the size of your child, the size of your vehicle, your budget, and lifestyle. Some vehicle seats will develop for a long time with your kid. As your kid grows, others will need to be upgraded.
Here are the fundamental seating kinds at We Best Product for you, we have comprehensive reviews for several models of each type.

1. Infant (rear-facing only) Car Seats

For newborns and infants, up until they weigh at least 10 kg (22 lb)

In rear-facing seats, whether infant seats or convertible seats, newborns and babies should always be guaranteed.

Why?

Because most crashes are frontal crashes, and the body is pushed forward. The effect is spread throughout the body with the child seat facing the back. The back of the child seat in this place promotes the head, neck, spine, and pelvis of the baby.

Best Infant Car Seats on Budget

INSTALLING THE SEAT IN THE VEHICLE

  • Use the directions on the seat to recline the back of the rear-facing seat. You can place a foam noodle or rolled-up towel under the seat, where the backrest of the car seat meets the seat cushion, to adjust the position of the rear-facing seat ❶ .
  • Use the Universal Anchorage System (UAS) or the seat belt to attach the seat to the car seat.
        The UAS or seat belt must pass through the car seat openings which are nearest to the backrest of the vehicle. To discover them, check the labels on the seat. If the rear-facing seat has a removable base, first use the UAS or the seat belt to connect the base, then place the seat on the base.
        You ought to listen to a click.
  • Tighten the UAS or seat belt to prevent the seat or base from moving to the front at all and from side to side no more than 2.5 cm. To tighten the UAS strap or seat belt, press your knee against the seat or base if necessary.
       Follow the directions in the handbook of your car owner to guarantee that the seat belt is correctly locked if you attach the rear-facing seat with the seat belt.

  • In the case of an infant seat, check the directions of the seat manufacturer to see if the carry handle has to be folded or left up behind the infant seat.

Best Infant Car Seats on Budget

SECURING THE CHILD IN THE SEAT

  • Thread the harness straps slightly below or at the shoulder level through the slots.
  • Insert the tongues of the buckle in the buckle.
  • Attach the chest clip to the underarm stage of the child.
  • Adjust the harness straps to the child’s body as tightly as feasible. There should be room between the harness straps and the chest of the child for no more than one finger.

If the child’s feet touch the backrest of the seat of the vehicle or the child’s legs are mildly bent, there is no risk.

When can you switch to a front-facing seat?

You can secure your child in a front-facing seat once he or she:
• is at least one year old;
• weighs more than 10 kg (22 lb);
• can maintain an upright position on his or her own.

Ideally, however, you should continue using the child’s rear-facing seat as long as your baby does not exceed the seat manufacturer’s weight or height boundaries. You must make sure that there is less than 2.5 cm of room between the top of the head of the child and the top of the rear-facing seat.


2. Convertible (Front Facing) Car Seats

For children who weigh at least 10 kg (22 lbs)

Once your child exceeds the weight or height limits indicated by the seat manufacturer for rear-facing installation, or once your child weighs at least 10 kg (22 lb), you can secure your child in a front-facing seat.

BEST CONVERTIBLE CAR SEAT 2019

INSTALLING THE SEAT IN THE VEHICLE

  • If the seat has a reclining system, ensure that it is tilted in the suggested position for front-facing seat installation.
  • Secure the seat or seat belt with the UAS.  UAS or seat belt shall pass through the car seat openings nearest to the backrest of the vehicle. To discover them, check the labels on the seat.
  • Fasten the tether strap to the anchorage point of the car. Reinforce the UAS or seat belt so that the seat does not migrate from side to side at all to the front and no more than 2.5 cm. To tighten the UAS strap or seat belt, press your shoulder against the seat if necessary.
    Follow the directions in the handbook of your car owner to correctly lock the seat belt if you attach the seat with the seat belt. Pull the seat belt once it is locked to secure the seat.
  • Tighten the strap of the tether.
front facing seat

SECURING THE CHILD IN THE SEAT

  • Make sure that the harness straps are threaded through the slots located at or slightly above the child’s shoulder level.
  • Insert the buckle tongues into the buckles.
  • Fasten the chest clip at the child’s underarm level.
  • Adjust the harness straps as closely as possible to the child’s body. There should be space for no more than one finger between the harness and the child’s shoulder.

You can also check the handbook of your car owner to see how much weight the UAS and the attachment point of the tether belt can support. If the combined seat and child weight exceeds the weight limit of the UAS, it is usually possible to secure the child seat with the seat belt.

When should you switch to a booster seat?

Until he or she weighs at least 18 kg (40 lb), your child should not use a booster seat. In addition, you must guarantee that the seat belt is properly fastened when the kid is sitting on the booster seat (it should pass the center arm of the kid (over the collarbone) and the hips). Your child should be secured in a front-facing child seat until he or she exceeds the weight or height limits specified by the manufacturer because of the additional security provided by harnesses.

BEST CONVERTIBLE CAR SEAT 2019


3. Booster Seats 

For children who weigh at least 18 kg (40 lb)

 

  • The booster seat raises the child so that the seat belt of the vehicle lies between the center of the shoulder (collarbone) and the hips (pelvis) . In case of a sudden stop or accident, the clavicle and pelvic bones are best able to absorb the effect.
  • It is necessary to secure the seat belt so that it is snug.
  • Some booster seats have a UAS to be used as directed by the manufacturer. If the car seat back is small or has no headrest, use a headrest booster seat to support the head of your child in the case of an effect.

     

booster seats

When is a booster seat no longer needed?

bootster seats

  1. Before wearing a seat belt, children must be at least 145 cm tall or 9 years old.
  2. When kids sit on the seat of the car, their back must be flat against the seat (d) with their knees bent over the seat (e) top. For the whole trip, they must be able to maintain this stance readily.
  3. The seat belt must be located across the center of the chest (f) and on the hips (g), not the neck (h) or abdomen (i).

Your kid should use a booster seat until he or she reaches the seat manufacturer’s weight or height boundaries, or AT THE VERY LEAST until you are confident that the seat belt will be completely adjusted when your kid is sitting straight on the seat of the car.

Children who are not sufficiently big will tend to slip under the belt of the seat and move forward to comfort. This could result in severe injury to the spine or internal organs in an accident because the seat belt would press against the throat or abdomen.


5 thoughts on “How to keep your child safe in the car

  1. Pingback: Best Infant Car Seats on Budget - Best Product for your choice

  2. Pingback: Best Convertible Car Seats of 2019 - Best Product for your choice

  3. Pingback: Bestselling Graco Child Seat – Health

  4. Pingback: The Evenflo Symphony Elite All-in-One Convertible Car Seat Review 2019

  5. Pingback: Britax One4Life Car Seat Review 2019 - Best Product for your choice

Leave a Reply

Your email address will not be published. Required fields are marked *